Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Manual do Utilizador descarregar pdf (Página 346)

Publication 1760-UM002B-EN-P - March 2005

7-18 Pico GFX-70 Settings

Possible Faults

Pico GFX-70 will not start in RUN mode:

• a program is not available in Pico GFX-70.

• you have selected Pico GFX-70 startup in STOP MODE (RUN MODE

menu).

Card Startup Behavior

The startup behavior with memory module is for applications where unskilled

personnel change the memory module under no-voltage conditions.

Pico GFX-70 only starts in the Run mode if a memory module with a valid

program is inserted.

If the program on the memory module is different to the program in Pico

GFX-70, the program from the card is loaded into the processor and the

processor starts in the RUN mode.

Switch to the System menu.

Activation of Card Mode

Requirement: RUN MODE is active.

If Pico GFX-70 displays

CARD MODE ✓, this means that when the power

supply is switched on, Pico GFX-70 will only start in RUN mode if a memory

module with a valid program has been inserted.

1. Otherwise select

CARD MODE and press OK.

Pico GFX-70 will start up with the program on the card.

2. Press ESC to return to the Status display.

IMPORTANT

If Pico GFX-70 is protected by a password, the System

menu will not be available until Pico GFX-70 is “unlocked”

(see Unlocking Pico GFX-70 on page 7-5).

DEBOUNCE ✓ ▲

P BUTTONS

RUN MODE ✓

CARD MODE ✓ ▼

1 2 ... 341 342 343 344 345 346 347 348 349 350 351 ... 399 400

Comentários a estes Manuais

Sem comentários