Rockwell-automation 1760-xxxx Pico GFX-70 Controllers User Manual Manual do Utilizador descarregar pdf (Página 100)

Publication 1760-UM002B-EN-P - March 2005

3-22 Commissioning

The menu BAUDRATE: 9600B will appear. The two baud rates are for 9600

or 19200 baud. Select the baud rate that your connection will support.

Baud Rate Selection

: 1. Press the OK button.

2. Select 19200 baud as the baud rate.

3. Press the up/down arrow button.

4. Confirm with the OK button.

5. Switch on the COM connection.

6. Press the press the down arrow button.

7. Press the OK button.

The tick on the Serial Interface menu item indicates that Serial Interface

has been selected.

No tick means that Serial Interface has not been selected.

BAUDRATE: 9600B

Serial Interface

REMOTE MARKER...

IMPORTANT

Select 19200 baud as the baud rate. Badly laid cables may

give rise to electromagnetic interference. Select 9600 baud

as the baud rate. If this is not satisfactory, the connection

cable must be laid in a different location.

BAUDRATE:19200B

Serial Interface

REMOTE MARKER...

IMPORTANT

The Serial Interface must only be switched at the

active station. Two devices with Serial Interface

✓

switched on cannot communicate with each other.

BAUDRATE:19200B

Serial Interface ✓

REMOTE MARKER...

IMPORTANT

The following applies to the active station:

If you wish to run data transfers between the two

devices in both directions, you must select the

marker range on the active station.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 399 400

Comentários a estes Manuais

Sem comentários