Rockwell-automation MPMA Integrated Multi-Axis Linear Stages Manual do Utilizador descarregar pdf (Página 118)

118 Rockwell Automation Publication MPMA-UM001B-EN-P - November 2010

Appendix D Home to Torque-level Example

Drive Bipolar Torque Limit

Adjustment

When homing an axis to a mechanical hard-stop, set the Home Torque-level

value above the torque value required to move the system, but low enough not to

cause problems with the system mechanics. As part of the process of homing to a

torque limit, limit the Peak Torque value to a level 10% above the Home Torque

value to reduce the stresses on the mechanics and to eliminate the chance of an

over-current error.

Limit the Peak Torque value before issuing the homing instruction (MAH) and

reset the Peak Torque field to the original value after homing completes.

Table 52 - Bipolar Torque Limit Adjustment

IMPORTANT

The 10% value is an estimated starting point. This value may need

adjustment based on the application requirements.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 135 136

Sem comentários

Rockwell-automation MPMA Integrated Multi-Axis Linear Stages Manual do Utilizador Página 118