Rockwell-automation 22-COMM-C ControlNet Adapter Manual do Utilizador descarregar pdf (Página 135)

ControlNet Objects C-17

N-Files (Continued)

DSI Port Assignments

PCCC Object (Continued)

DSI Port No. Single Mode Multi-Drive Mode

0 The drive Drive 0

1 The adapter Drive 1

2 The slave Drive 2

3 Not supported Drive 3

4 Not supported Drive 4

5 Not supported The adapter

N-File Description

N41

For Single Mode Only

This N-file lets you read and write control I/O messages. You can write

control I/O messages only when all of the following conditions are true:

• The adapter is not receiving I/O from a scanner. For example, there is

no scanner on the network, the scanner is in idle (program) mode, the

scanner is faulted, or the adapter is not mapped to the scanner.

• The value of N42:3 is set to a non-zero value.

Write Read

N41:0

N41:1

N41:2

Logic Command Word

Unused

Reference

Logic Status Word

Unused

Feedback

N42 This N-file lets you read and write some values configuring the port.

N42:3 Control Time-out (read/write): Time (in seconds) allowed between

messages to the N41 or N44 file. If the adapter does not receive a

message in the specified time, it performs the fault action configured in its

[Comm Flt Action] parameter.

N42:7 Adapter Port Number (read only): DSI port on the drive to which the

adapter is connected.

N42:8 Peer Adapters (read only): Bit field of devices having Peer capabilities.

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 163 164

Sem comentários

Rockwell-automation 22-COMM-C ControlNet Adapter Manual do Utilizador Página 135