Rockwell Automation 1203-SSS Manual do Utilizador descarregar pdf (Página 14)

Publication 1203-5.14 – September 1998

2-2 Installation

Installing Your 1203-SSS Converter

The following instructions explain how to physically install your

1203-SSS converter.

1. Connect the 1203-C10 SCANport cable to the SCANport product

and the converter.

To connect the cable to the converter, align the pins on the cable

with the holes in the SCANport connection and then insert the

SCANport cable. The cable will click into a locked position.

Important: Because the converter receives its power from the

SCANport product, the SCANport product must be powered for the

converter to work.

Figure 2.1

Connecting the SCANport Cable to the Converter

2. Connect the 1203-SSS serial cable to the converter and then to

your PC’s serial port. The cable will click into a locked position.

Figure 2.2

Connecting a Serial Cable to the Converter

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Sem comentários

Rockwell Automation 1203-SSS Manual do Utilizador Página 14