Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual do Utilizador descarregar pdf (Página 23)

Installing the EtherNet/IP Module

3-3

Step 3. Connect the Internal Interface cable to the DPI port on the

drive and then to the DPI connector on the module. See

figure 3.2.

Step 4. For SP600 6SP Series drives, fold the Internal Interface

cable behind the module and mount the module on the

drive using the four captive screws. See figure 3.3.

➀

15.24 cm (6 in) Internal Interface cable

➁

DPI Connector

➂

EtherNet Cable

➃

2.54 cm (1 in) Internal Interface cable

Figure 3.2 – DPI Ports and Internal Interface Cables

EtherNet/IP module

SP600 Drive

(6SP Series)

GV6000 or SP600 6SB Series Drive

➀

➁

➂

➃

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 193 194

Sem comentários

Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual do Utilizador Página 23