Rockwell-automation RECOMM-ENET EtherNet/IP Communications Module Manual do Utilizador Página 122

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 194
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 121
B-4
EtherNet/IP Communications Module
Sets the bytes of the gateway address.
Important: To set the gateway address using these parameters,
parameter 3 (BOOTP) must be set to Disabled.
Configures the network data rate and duplex mode at which the
module communicates. Updates EN Rate Act (17) after reset.
12
13
14
15
Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4
Range: 0 to 255
Default: 0
Type: Read/Write
Reset Required: Ye s
255 . 255 . 255 . 255
Gateway Cfg 1
Gateway Cfg 2
Gateway Cfg 3
Gateway Cfg 4
16 EN Rate Cfg
Range: 0 = Autodetect
1 = 10 Mbps Full
2 = 10 Mbps Half
3 = 100 Mbps Full
4 = 100 Mbps Half
Default: 0 = Autodetect
Type: Read/Write
Reset Required: Ye s
Vista de página 121
1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 193 194

Comentários a estes Manuais

Sem comentários