Rockwell-automation 284D On-Machine ArmorStart Accelerator Toolkit Manual do Utilizador descarregar pdf (Página 161)

Publication IASIMP-QS015C-EN-P - August 2011 161

Logix Communication and Controller Configuration Appendix A

3. Double-click a request from

one of the devices.

4. Enter a unique IP address for

each device.

5. Click OK.

If you are not on an isolated

network, obtain the IP

addresses from your network

administrator.

6. Repeat steps 3…5 for each

device, except for the

PanelView Plus terminal.

7. Select the first device in the Relation

List field.

8. Click Disable BOOTP/DHCP.

9. Repeat steps 7…8 for all devices

except for the PanelView Plus

terminal.

10. Close the BOOTP/DHCP utility.

If prompted to save changes, click No.

IMPORTANT

If you cycle power, the device will not retain its IP address unless you disable BOOTP/DHCP.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 187 188

Sem comentários

Rockwell-automation 284D On-Machine ArmorStart Accelerator Toolkit Manual do Utilizador Página 161