Rockwell-automation 22-COMM-E EtherNet/IP Adapter Manual do Utilizador descarregar pdf (Página 36)

3-12 Configuring the Adapter

The following parameters provide information about how the adapter is

configured. You can view these parameters at any time.



Viewing the Adapter Configuration

Number Name Description

01 Mode The mode in which the adapter is set:

Values

0 = Single drive operation

2 = Multi-Drive operation

16 EN Rate Act The data rate used by the adapter:

Values

1 = 10M bits/sec full

2 = 10M bits/sec half

3 = 100M bits/sec full

4 = 100M bits/sec half

23 DSI I/O Act Indicates the Drives that are active in the Multi-Drive mode:

Bit Definitions

0 = Drive 0 Active

1 = Drive 1 Active

2 = Drive 2 Active

3 = Drive 3 Active

4 = Drive 4 Active

29 Web Enable Indicates the setting of the Web Pages Switch (SW2) on the

adapter when the adapter was last reset:

Values

0 = Disabled

1 = Enabled

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 165 166

Sem comentários

Rockwell-automation 22-COMM-E EtherNet/IP Adapter Manual do Utilizador Página 36