Rockwell Automation 1203-SSS Manual do Utilizador descarregar pdf (Página 76)

D-2 Use with DriveExecutive Software

PowerFlex 1203-USB Converter User Manual

Publication DRIVES-UM001D-EN-P

Configuring the Converter

With DriveExecutive software, version 1.01 or later, you can edit

parameters in both the 1203-USB converter and the connected drive. With

DPI and DSI drives, you can also edit parameters in any of their connected

peripherals.

Important:For DriveExecutive software to operate with DSI drives

point-to-point, converter Parameter 01 - [Adapter Cfg] must

be set to ‘0’ (Auto, the default). If this parameter needs to be

changed, HyperTerminal software can be used to configure the

converter (see Use with HyperTerminal Software

on page E-1).

This procedure is provided to help you use DriveExecutive software with

the 1203-USB converter. If you are unsure how to complete a step, refer to

the software online help (from the Help menu, choose Help Topics).

1. Obtain and note the COM port that was assigned during installation of

the 1203-USB driver by doing the following.

When Using Windows XP Operating System

a. Open the Windows Control Panel and double-click System.

b. In the System Properties window, click the Hardware tab.

c. Click Device Manager.

When Using Windows 7 Operating System

a. Open the Windows Control Panel.

b. Click Device Manager.

2. In the Device Manager treeview, expand the Ports (COM & LPT)

group.

The assigned COM port is shown in parenthesis at the end of the

Allen-Bradley 1203-USB entry.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 111 112

Sem comentários

Rockwell Automation 1203-SSS Manual do Utilizador Página 76