Rockwell Automation 1203-SSS Manual do Utilizador descarregar pdf (Página 33)

PowerFlex 1203-USB Converter User Manual

Publication DRIVES-UM001D-EN-P

Chapter 3

Configuring the Converter

This chapter provides instructions and information for setting the

parameters to configure the 1203-USB converter.

For a list of parameters, see the following sections:

• Parameters – DPI Drives

on page B-1

• Parameters – DSI Drives on page B-2

• Parameters – SCANport Drives (DriveExplorer or DriveExecutive

software only) on page B-4

For definitions of terms in this chapter, see the Glossary.

Configuration Tools

The 1203-USB converter stores parameters and other information in its own

nonvolatile storage (NVS) memory. You must, therefore, access the

converter to view and edit its parameters. The following tools can be used to

access the converter parameters.

Important:The RS-485 serial port on DSI drives does not need to be

configured before using the converter. DSI communications are

configured automatically (19.2K baud and 8-N-1).

Topic Page

Configuration Tools

3-1

Using Connected Components Workbench Software 3-2

Resetting the Converter 3-7

Updating the Firmware 3-8

Using RTU Master Mode for a Serial Multi-drop Network 3-8

Tool Page

Connected Components Workbench Software, version 1.02 or later 3-2

DriveExplorer Software, version 4.04 or later C-1

DriveExecutive Software, version 1.01 or later D-1

Terminal Emulation Software (such as HyperTerminal) E-1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 111 112

Sem comentários

Rockwell Automation 1203-SSS Manual do Utilizador Página 33