Rockwell-automation SB3000 Configuration and Programming Manual do Utilizador descarregar pdf (Página 76)

3-58

SB3000 Drive Configuration and Programming

Meter Port 4

UDC Module Meter Port 4 Register Number Register 1014

UDC register number (0 - 2044) to be mapped to meter port 4.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

UDC Module Meter Port 4 Bit Number Register 1015

Bit number of the UDC register specified in register 1002 that is to be

mapped to port 4. Enter a value of 100 (bit 00) to 115 (bit 15) as

required. Enter a value of zero if all of the register’s bits are to be

displayed.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

UDC Module Meter Port 4 Maximum Value Register 1016

Set this register to the number that will represent +10V. The

maximum allowable value is 32767.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

UDC Module Meter Port 4 Minimum Value Register 1017

Set this register equal to the number that will represent -10V. The

minimum allowable value is -32768.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 121 122

Comentários a estes Manuais

Sem comentários

Rockwell-automation SB3000 Configuration and Programming Manual do Utilizador Página 76

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Rockwell-automation SB3000 Configuration and Programming