Rockwell-automation GMLC Reference Manual Manual do Utilizador descarregar pdf (Página 880)

Publication GMLC-5.2 - November 1999

Sending Commands Directly to the Motion Controller 843

Note: For information about each direct command, see Function

Blocks in the GML Commander Reference Manual

(publication GMLC-5.2).

3. Configure the dialog box with appropriate information.

4.

If you select: The following occurs:

Execute The block’s dialog box closes.

The Reexecute Direct Cmd command on the

Diagram menu and its corresponding button on

the online toolbar are reenabled.

In the Terminal Window, the command sent to

the controller appears:

• In English if Normal Mode is selected.

• In iCODE if Terminal Mode is selected.

Apply Now The block’s dialog box remains open to allow

you to:

• Reselect the Apply Now command to

execute the block again.

• Change the fields of the block’s dialog box

before reselecting the Apply Now command.

In the Terminal Window, the command sent to

the controller appears:

• In English if Normal Mode is selected.

• In iCODE if Terminal Mode is selected.

1 2 ... 875 876 877 878 879 880 881 882 883 884 885 ... 957 958

Comentários a estes Manuais

Sem comentários