Rockwell-automation GMLC Reference Manual Manual do Utilizador descarregar pdf (Página 336)

100

101

Publication GMLC-5.2 - November 1999

Input 299

Input Class

There are three options for the Input Class field:

• Configured – causes the Configured tab to display for access to the

Configured page.

• Dedicated – causes the Dedicated tab to display for access to the

Dedicated page.

• Miscellaneous – causes the Miscellaneous tab to display for access to

the Miscellaneous page.

Configured

To complete the definition of a configured input, make entries in the

following fields:

• Tag Explorer – Select an input type from the tree control. The

specific inputs or input bits associated with a the selected input type

appear in the Tag Window.

Note: If an input type does not appear, it has not been enabled.

• Tag Window – Select the input or input bit to use with a Wait for

Input On, Wait for Input Off, or If Input command.

Note: If a particular input or input bit does not appear, it has not

been defined.

Dedicated

To complete the definition of a dedicated input, make entries in the

following fields:

• Axis – Select the axis, from which the input is read.

• Input – Select the desired Input

The available selections will depend upon:

• The Controller Type selected in the General page of the Config-

ure Control Options dialog box (e.g., Resolver Loss Event and

Resolver Loss State selections apply only to 1394 and 1394

1 2 ... 331 332 333 334 335 336 337 338 339 340 341 ... 957 958

Comentários a estes Manuais

Sem comentários

Rockwell-automation GMLC Reference Manual Manual do Utilizador Página 336

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Rockwell-automation GMLC Reference Manual