Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Manual do Utilizador descarregar pdf (Página 25)

Installing the Adapter 2-9

Apply power to the drive. The adapter receives its power from the

connected drive. When you apply power to the adapter for the first time,

its topmost status indicator “PORT” should be solid green after an

initialization. If it is red, there is a problem. Refer to Chapter 5

Troubleshooting.

Start-Up Status Indications

Status indicators for the drive and communications adapter can be

viewed on the front of the drive (Figure 2.8

) after power has been

applied. Possible start-up status indications are shown in Table 2.B.

Figure 2.8 Drive and Adapter Status Indicators (location on drive may vary)

Applying Power

ATTENTION: Risk of equipment damage, injury, or death exists.

Unpredictable operation may occur if you fail to verify that parameter

settings and switch settings are compatible with your application.

Verify that settings are compatible with your application before

applying power to the drive.

➋

➊

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Sem comentários

Rockwell-automation 22-COMM-B PowerFlex BACnet MS/TP Adapter Manual do Utilizador Página 25