Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Manual do Utilizador descarregar pdf (Página 4)

Publication 20P-IN004B-EN-P

Frame B and C Drives

1. Disconnect the DPI cable from the HIM (if present).

2. Loosen, but do not remove, the screws that secure the top and bottom front

covers to the drive, then slide the covers off the drive chassis.

Important: The HIM assembly is connected to the control board via a

communication cable. Carefully set the top cover down next

to the chassis.

3. Continue with Disconnect the HIM Communication Cable

on page 6.

Disconnect

DPI cable.

Frames B shown

Tightening torque:

1.5 N•m (13.3.lb•in)

Loosen

screws

Loosen

screws

1 2 3 4 5 6 7 8 9 ... 17 18

Sem comentários

Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Manual do Utilizador Página 4