Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Manual do Utilizador descarregar pdf (Página 14)

Publication 20P-IN004B-EN-P

2. Carefully disconnect the cables from connectors XFCD, XA, and XR on the

control board.

3. Remove the plug-in I/O and control terminal blocks with the wiring kept in

place.

4. Remove the five screws that secure the control board to the control EMI

shield and remove the board from the drive.

Disconnect

cables

Disconnect I/O

and control

wiring

Remove screws

Tightening torque:

1.0 N•m (8.9 lb•in)

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sem comentários

Rockwell-automation 20P, 23P PowerFlex DC Drive and SAR Control Circui Manual do Utilizador Página 14