Rockwell-automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE Manual do Utilizador descarregar pdf (Página 31)

1785-6.5.19 November 1998

Chapter

Communicating via the Interface Module

Using This Chapter Once the PLC-5 Ethernet interface module is connected and

configured, the interface module and the processor function as

one unit.

Applying Power to the Chassis After installing the interface module into the chassis and configuring

channel 3A for Ethernet communication, apply power to the 1771 I/O

chassis. Upon power-up, the PLC-5 Ethernet interface module

performs the following functions:

• establishes communication with the PLC–5 processor

• broadcasts BOOTP requests (if BOOTP is enabled; see page 3-4)

Monitoring the LEDs If your module is operating correctly, you see these LED indications:

• Status LED remains lit green

• Ethernet Transmit LED briefly lights green when transmitting

packets

If the LEDs do not indicate the above normal operation, see the

following table for an explanation of indicator lights.

For information about: See page:

Applying power to the chassis 4-1

Monitoring the LEDs 4-1

Establishing an Ethernet connection 4-3

Monitoring Ethernet status data 4-4

Using the MSG instruction 4-5

Communicating with ControlLogix Devices 4-6

Interpreting error codes 4-7

Identifying the interface module within a network 4-9

Saving/restoring programs 4-9

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 53 54

Sem comentários

Rockwell-automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE Manual do Utilizador Página 31