Rockwell-automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE Manual do Utilizador descarregar pdf (Página 11)

1785-6.5.19 November 1998

Quick Start 1-3

Important: Make sure you carefully align the pins and holes before

you press the connector header into the processor. If you improperly

align them, you will bend the connector header pins when you press

them together. Do not use excessive force on the connector header

when seating it into the processor. You do not need to key the

connector.

Step 3 Attach the connector header to the processor See Chapter 2

Installing the Interface Module

19379

Attach the interface

module to this end.

connector

header

Push the exposed pins

into the holes on the

PLC-5 processor.

Wear a grounding wrist

strap to guard against ESD.

Step 4 Use the captive screws to connect the interface module to

the processor.

See Chapter 2

Installing the Interface Module

Front of the PLC-5 processor

Front of the interface module

Installed connector

header

20597±M

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 53 54

Sem comentários

Rockwell-automation 1785-ENET USER MANUAL PLC-5 ETHERNET INTERFACE Manual do Utilizador Página 11