Rockwell-automation 1784-PCIDS DeviceNet PCI Communication Interface C Manual do Utilizador descarregar pdf (Página 15)

Publication 1784-IN004E-EN-P - April 2005

Chapter

Install the 1784-PCIDS Card

Before You Begin

For Information On This Topic Refer To Page

Before You Begin 2-1

Access the Computer’s PCI Local Bus Expansion Slots 2-2

Insert the Card Into the Computer 2-3

Connect to the Network 2-3

WARNING

If you connect or disconnect the communications cable with power

applied to this module or any device on the network, an electrical arc

can occur. This could cause an explosion in hazardous location

installations.

When used in a Class I, Division 2, hazardous location, this

equipment must be mounted in a suitable enclosure with proper

wiring method that complies with the governing electrical codes.

If you insert or remove the card while host power is on, an electrical

arc can occur. This could cause an explosion in hazardous location

installations.

Be sure that power is removed or the area is nonhazardous before

proceeding.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

Sem comentários

Rockwell-automation 1784-PCIDS DeviceNet PCI Communication Interface C Manual do Utilizador Página 15