Rockwell-automation 1769-IF8 Compact 1769-IF8 Analog Input Module Manual do Utilizador descarregar pdf (Página 4)

4 Compact I/O 1769-IF8 Analog Input Module

Publication 1769-IN067B-EN-P - September 2005

System Assembly

The module can be attached to the controller or an adjacent I/O module before or

after mounting. For mounting instructions, see “Panel Mounting” on page 6, or

“DIN Rail Mounting” on page 7. To work with a system that is already mounted, see

“Replacing a Single Module within a System” on page 7.

The following procedure shows you how to assemble the Compact I/O system.

1. Disconnect power.

2. Check that the bus lever of the module to be installed is in the unlocked

(fully right) position.

3. Use the upper and lower tongue-and-groove slots (1) to secure the modules

together (or to a controller).

4. Move the module back along the tongue-and-groove slots until the bus

connectors (2) line up with each other.

5. Push the bus lever back slightly to clear the positioning tab (3). Use your

fingers or a small screwdriver.

30536-M

1 2 3 4 5 6 7 8 9 ... 31 32

Sem comentários

Rockwell-automation 1769-IF8 Compact 1769-IF8 Analog Input Module Manual do Utilizador Página 4