Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Manual do Utilizador descarregar pdf (Página 56)

48 Rockwell Automation Publication 1734-UM017B-EN-P - October 2013

Chapter 4 Configure the Adapter for Direct Connection in RSLogix 5000 Software

4. Choose Download.

The Download dialog opens with a reminder of the following.

• The controller is in Remote Run mode.

• The mode changes to Remote Program prior to download.

5. From the Download dialog, choose Download

The RSLogix 5000 software dialog opens.

6. Notice that the 1756-ENBT Bridge is now online.

If yellow triangles are present, see the following section.

Verify the Module Chassis

Size

You have now built the I/O tree in the RSLogix 5000 software, and the

RSLogix 5000 software used the chassis size from the 1734-AENTR General tab.

Now you need to download this new chassis size value into the 1734-AENTR

adapter hardware. This procedure synchronizes the chassis size value from the

RSLogix 5000 software into the 1734-AENTR adapter hardware.

1. Verify that the RSLogix 5000 software is online.

2. In the Project dialog, right-click the 1734-AENTR adapter under I/O

Configuration.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 119 120

Sem comentários

Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Manual do Utilizador Página 56