Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O Manual do Utilizador Página 25
- Página / 120
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Rockwell Automation Publication 1734-UM017B-EN-P - October 2013 17
Install Your POINT I/O or ArmorPOINT I/O Adapter Chapter 2
ATTENTION: Do not wire more than two conductors on any single
terminal.
WARNING: When you connect or disconnect the Removable Terminal
Block (RTB) with field side power applied, an electrical arc can occur.
This could cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
WARNING: When used in a Class I, Division 2, hazardous location, this
equipment must be mounted in a suitable enclosure with proper wiring
method that complies with the governing electrical codes.
WARNING: If you connect or disconnect the communications cable
with power applied to this module or any device on the network, an
electrical arc can occur. This could cause an explosion in hazardous
location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
- EtherNet/IP Adapters 1
- Important User Information 2
- Who Should Use this 3
- Purpose of this Manual 3
- Common Techniques Used 4
- Table of Contents 5
- Adapter Features 9
- What the Adapter Does 10
- Physical Features of Your 11
- Adapters 11
- software releases 12
- chassis size 12
- Replacement 13
- Use of the Common 14
- Industrial Protocol (CIP) 14
- Chapter Summary 16
- Overview 17
- A = DIN rail 18
- Install POINT I/O Modules 19
- Remove POINT I/O Modules 19
- Remove ArmorPoint I/O Modules 22
- Replace An Adapter 23
- Wire the Adapter 24
- for more information 26
- third party DHCP server 27
- Configuration 28
- Requirements 28
- Gateway Address 29
- Subnet Mask 30
- Network Address 31
- Use the Rockwell BootP/ 32
- DHCP Utility 32
- 1. Run the BootP software 33
- Save the Relation List 35
- Use DHCP Software to 36
- Configure Your Adapter 36
- Set Up the Hardware 38
- Create the Example 39
- Application 39
- Configure the I/O Modules 40
- New Module 41
- Name Local_ENBT 42
- IP Address 10.88.70.4 42
- Add the POINT I/O Adapter 44
- Name POINT IO Adapter 45
- IP Address 10.88.70.2 45
- IMPORTANT 45
- 1734-SG001 48
- The New Module dialog opens 49
- Ethernet 53
- Edit the Controller Tags 54
- Create the Ladder Program 55
- Download the Program to 55
- Verify the Module Chassis 56
- 3. Select Properties 57
- 4. Click the Connection tab 57
- Configure the Adapter with 59
- Fixed IP Address 59
- Recover From an 60
- Overloaded Adapter 60
- Software 61
- Connection 72
- 72
- 10. Click OK 77
- Verify the Module 79
- Chassis Size 79
- 8. Click OK to continue 80
- Access Module Data 82
- Troubleshoot the Adapter 83
- 1738-AENTR 86
- Series B 86
- Specifications 89
- Power Supply 91
- EtherNet Communication 91
- Environmental 92
- Adapter Web Dialogs 93
- Work with the Diagnostics 95
- Download EDS files for 96
- Use the Network Settings Page 97
- Use the I/O Connections Page 100
- Work with the 102
- Configuration Pages 102
- Use the Identity Page 104
- Use the Services Page 106
- Work with the Browse 107
- Chassis Page 107
- If there is no response to 108
- Communication Driver 109
- Configure the AB_ETH/IP 112
- Rockwell Automation Support 120
- Documentation Feedback 120
Manuais e produtos relacionados com Equipamento Rockwell-automation 1738-AENTR, Series B POINT I/O and ArmorPOINT I/O
Equipamento Rockwell-automation 1769-OA8 Compact 100 to 240V ac Solid State Output Manual do Utilizador
(20 páginas)
(20 páginas)
Equipamento Rockwell-automation 1734-PDN/B Point I/O DeviceNet Communication Inter Manual do Utilizador
(20 páginas)
(20 páginas)
Equipamento Rockwell-automation 1786-RPFRXL ControlNet Fiber Ring Modules Installa Manual do Utilizador
(40 páginas)
(40 páginas)
Equipamento Rockwell-automation 1732E-XXXX ArmorBlock 2-Port EtherNet/IP Modules w Manual do Utilizador
(24 páginas)
(24 páginas)
Equipamento Rockwell-automation 1747-L55x,D174710.4 SLC 500 Ethernet Manual do Utilizador
(70 páginas)
(70 páginas)
Equipamento Rockwell-automation 1769-ADN Compact I/O DeviceNet Adapter Manual do Utilizador
(28 páginas)
(28 páginas)
Equipamento Rockwell-automation 1746-Px SLC 500 Power Supplies Installation Instru Manual do Utilizador
(20 páginas)
(20 páginas)
Equipamento Rockwell-automation 1747-PCINT API Software for 1746 I/O Manual do Utilizador
(155 páginas)
(155 páginas)
Equipamento Rockwell-automation 1746-NI16V SLC 500 Analog I/O Modules Manual do Utilizador
(20 páginas)
(20 páginas)
Equipamento Rockwell-automation 1746-MPM INSTALL INSTRUC MOLD PRESSURE Manual do Utilizador
(24 páginas)
(24 páginas)
Equipamento Rockwell-automation 1771-OFE/B Analog Output Module User Manual Manual do Utilizador
(84 páginas)
(84 páginas)
Equipamento Rockwell-automation 1738-8CFGM23 ArmorPoint Module with Configurable 2 Manual do Utilizador
(20 páginas)
(20 páginas)
Equipamento Rockwell-automation 1784-KTCX15 INSTL INSTR CONTROLNET COMM. Manual do Utilizador
(18 páginas)
(18 páginas)
Equipamento Rockwell-automation 1760-xxxx Pico Controller User Manual Manual do Utilizador
(218 páginas)
(218 páginas)
Equipamento Rockwell-automation 1769-OA16 Compact 16-Point 100 to 240V ac Output M Manual do Utilizador
(20 páginas)
(20 páginas)
Equipamento Rockwell-automation 1792D-8BVT8D ArmorBlock MaXum 8 Input/8 Output Mod Manual do Utilizador
(16 páginas)
(16 páginas)
Equipamento Rockwell-automation 1769-SDN Compact I/O DeviceNet Scanner Module User Manual do Utilizador
(156 páginas)
(156 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais