Rockwell-automation 160 SSC Remote Keypad User Manual Manual do Utilizador descarregar pdf (Página 17)

Chapter

Troubleshooting

How to Clear a Fault

When a fault occurs, the cause must be corrected before the fault can be cleared.

After corrective action has been taken, any of the following actions will clear the

fault.

• Press the Remote Keypad Stop button

• Set

P54 - [Clear Fault]

to 1.

• Disconnect power to the drive, wait three minutes, reapply power.

• Cycle the input signal at TB3-8 to the drive.

Please consult the 160 SSC™ Variable Speed Drive (Series C)

User Manual

Publication 0160-5.15, for a complete listing of fault descriptions and possible

problems and corrective actions.

ATTENTION:

Only personnel familiar with the drive and

associated machinery should plan or implement the installation, start-

up, and subsequent maintenance of the system. Failure to comply may

result in personal injury and/or equipment damage.

ATTENTION:

Ensure that you disconnect line power and wait

three minutes before installing or removing the Ready/Fault

Indicating Panel or Program Keypad Module. Failure to do so could

result in personal injury or death.

1 2 ... 12 13 14 15 16 17 18 19 20 21

Sem comentários

Rockwell-automation 160 SSC Remote Keypad User Manual Manual do Utilizador Página 17