Rockwell-automation Discrete Machine Performance Solution Manual do Utilizador descarregar pdf (Página 22)

DISCRETE MACHINE PERFORMANCE SOLUTION USER’S GUIDE

• • • • •

5. Gradually tighten the clips one at a time around the bezel using the specified

sequence. Note that the sequence begins with the center clips and continues to the

corner clips.

Repeat this process at least three times until the clips are hand-tight and the gasket is

compressed uniformly against the panel.

Tighten mounting clips to a torque of 10 in-lbs (1.1 N•m) in the sequence shown

above. Do not over-tighten.

Connecting a keyboard and pointing device

A keyboard and pointing device can be plugged individually into the PS/2 port on the

bottom of the computer. There are separate PS/2 ports for the keyboard and the pointing

device.

Tighten mounting clips to a torque of 10 in-lbs (1.1 N•m) to provide a proper seal and prevent

damage to the VersaView computer. Rockwell Automation assumes no responsibility for

water or chemical damage to the terminal or other equipment within the enclosure because

of improper installation.

Discrete.book Page 16 Wednesday, December 8, 2004 2:22 PM

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 105 106

Sem comentários

Rockwell-automation Discrete Machine Performance Solution Manual do Utilizador Página 22