Rockwell-automation Discrete Machine Performance Solution Manual do Utilizador descarregar pdf (Página 20)

DISCRETE MACHINE PERFORMANCE SOLUTION USER’S GUIDE

• • • • •

Panel cutout dimensions

Panel mounting guidelines

Observe the precautions below when installing the computer in a panel:

 Confirm that there is adequate space behind the panel. A cabinet with a minimum

depth of 127 mm (5.0 in) is sufficient.

 Supporting panels should be at least 14 gauge to ensure proper sealing against water

and dust and to provide proper support. The mounting hardware supplied

accommodates panels up to 6.25 mm (0.25 in) thick.

Installing computer in panel

To install the computer in a panel using mounting clips:

Supporting panels must be cut to specifications before installation.

Disconnect all electrical power from the panel before making cutout.

Make sure area around the panel cutout is clear.

Take precautions so that metal cuttings do not enter any components that are already installed in

the panel.

Failure to follow these warnings may result in personal injury or damage to the panel

components.

Discrete.book Page 14 Wednesday, December 8, 2004 2:22 PM

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 105 106

Sem comentários

Rockwell-automation Discrete Machine Performance Solution Manual do Utilizador Página 20