Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Manual do Utilizador descarregar pdf (Página 54)

52 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013

Chapter 4 Drive Terminal Application

Diagnostics

The PowerFlex 7000 drive can capture parameters on a real-time basis for later

analysis.

The Diagnostics screen, typical of Figure 50

, consists of sub panels used to:

• Configure the diagnostic setup

• Control and provide status of the operation of the data collection.

• View the collected data in tabular format

• View the collected data in a plot

Figure 50 - Diagnostics Screen

Assign a Parameter to a Trace

The data is captured to a number of traces.

To assign a parameter to a trace:

1. Select the desired trace.

2. Select the Parameter column header. See Assign a Parameter

on page 43.

If the parameter number is known:

1. Select the desired trace.

2. Press the Linear column header.

This opens the Soft Keypad. The parameter number can be directly

entered.

Parameters can also be selected for assignment by using the ‘Search’ button.

Parameters are not plotted by default.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 89 90

Sem comentários

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Manual do Utilizador Página 54