Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Manual do Utilizador descarregar pdf (Página 24)

22 Rockwell Automation Publication 7000-UM201B-EN-P - June 2013

Chapter 2 PowerFlex HMI Interface Board

IP Setup with Forge Shell

1. Press the ‘Maintenance’ button (Figure 15).

Figure 15 - Forge Shell

2. Select IP Setup.

Figure 16 - IP Setup

3. Select the MAC Address in the pulldown menu (Figure 16) that

corresponds to the MAC ID printed on the white label of the HMI

Interface Board (see Figure 79

4. Enter the IP Address, Sub Mask and Gateway address and click Apply.

This information must be obtained from your network administrator.

If the IP address is set to all zeroes, the module will be configured use a

Dynamic IP address assigned by a DHCP server, if one exists on the

network.

5. After the HMI Interface Board module has reset in the Forge Shell

application, click Maintenance and Refresh.

The configured module now appears with its new IP address.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 89 90

Sem comentários

Rockwell-automation 7000 PowerFlex HMI Offering with Enhanced Function Manual do Utilizador Página 24