Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual do Utilizador descarregar pdf (Página 51)

Rockwell Automation Publication 20COMM-UM015B-EN-P - July 2013 51

Configuring the I/O Chapter 4

For convenience, keep the project open. Later in this chapter the project

will need to be downloaded to the controller.

There are three ways to add the adapter into the I/O configuration:

• Device Add-on Profiles (RSLogix 5000 software, version 16.00 or later)

• Classic Profile (RSLogix 5000 software, versions 13.00…15.00)

• Generic Profile (RSLogix 5000 software, all versions)

These are described in separate sections below. If your version of RSLogix 5000

software supports device Add-on Profiles, we recommend that you use this

method.

Using RSLogix 5000 Device Add-on Profiles, Version 16.00 or Later

When compared to using the RSLogix 5000 Classic Profile (versions

13.00…15.00) or Generic Profile (all versions), the RSLogix 5000 device Add-on

Profiles provide the following advantages:

• Profiles for specific drives that provide descriptive controller tags for basic

control I/O words (Logic Command/Status and Reference/Feedback)

and Datalinks. Additionally, Datalinks automatically take the name of the

drive parameter to which they are assigned. These profiles virtually

eliminate I/O mismatch errors and substantially reduce drive

configuration time.

• New Drive tab eliminates the need for a separate drive software

configuration tool.

• Drive configuration settings are saved as part of the RSLogix 5000

software, version 16.00 or later, project file (.ACD) and also downloaded

to the controller.

• Unicast connection (RSLogix 5000 software, version 18.00 or later)

• Device Add-on Profiles can be updated anytime. When a new drive is used

or to benefit from new updates for Add-on Profiles, you will need the

newest Add-on Profile update. Go to www.ab.com/support/abdrives/

webupdate to download the latest RSLogix 5000 device Add-on Profile.

To determine your device Add-on Profile version, see Allen-Bradley

Knowledgebase document #65882.

Add the Drive/Adapter to the I/O Configuration

To transmit data between the bridge and the drive, you must add the drive as a

child device to the parent bridge. In this example, RSLogix 5000 software,

version 16.00 is used with device Add-on Profile version 4.05 or later.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 237 238

Sem comentários

Rockwell-automation 20-COMM-ER 20-COMM-ER Dual-Port EtherNet/IP Commun Manual do Utilizador Página 51