Rockwell-automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 I Manual do Utilizador descarregar pdf (Página 11)

16 Input/16 Output Digital and 2 Input/2 Output Analog Embedded I/O Boards 11

Publication 1799-IN011A-EN-P - February 2007

The DeviceNet wire insulation colors are shown below.

Auxiliary Power Specifications

The power source used to supply the auxiliary power to the outputs and analog circuitry must

meet the following:

These conditions requires that the board and power source be mounted in a suitable,

ultimate enclosure with proper spacings maintained.

P1 DeviceNet Connector

Pin Insulation Colors

1Black

2Blue

3Shield

4White

5Red

ATTENTION

To comply with the CE Low Voltage Directive (LVD), all connections to this equipment must be

powered from a source compliant with the following:

Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV) with isolated outputs

limited to 200

volt-amperes in each ungrounded output line.

ATTENTION

To comply with UL restrictions, this equipment must be powered from a source compliant

with the following:

Class 2 or UL Listed /Recognized Power Supply with isolated outputs limited to

200 volt-amperes in each ungrounded output line. This condition requires that

the board and power source be mounted in a suitable ultimate enclosure with

proper spacings maintained.

ATTENTION

Do not wire more than 2 conductors on any single terminal.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Sem comentários

Rockwell-automation 1799-D16U16BAGL 16 Input/16 Output Digital and 2 I Manual do Utilizador Página 11