Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Manual do Utilizador descarregar pdf (Página 12)

12 ControlNet-to-DeviceNet Linking Device

Publication

1788-IN052D-EN-P - February 2007

5. If you are mounting your CN2DN device in a high-vibration

area, insert screws (not included) into the holes of the

mounting tabs and tighten so that the screws are firmly

anchored into the panel behind the device.

You have completed mounting your CN2DN device on a DIN rail.

Mount the CN2DN Device on a Panel or Other Fixture

To mount the CN2DN device on a panel or other suitable fixture,

insert five screws (not included) through the module’s mounting tabs

and into the panel or fixture behind the module. Use screws long

enough to penetrate the panel or fixture for a secure mount.

IMPORTANT

If mounting the CN2DN device to a panel, ensure that the panel is

conductive metal and properly grounded. Paint or other coatings

should be sanded from the panel to ensure the CN2DN device

makes sufficient conductive contact with the panel.

Mount Tabs (Optional Use)

Ground Connection

(Optional) - For use if

DIN rail or panel is

not grounded. If

used, this tab must

be properly

connected to the

earth ground.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Sem comentários

Rockwell-automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Manual do Utilizador Página 12