Rockwell-automation 1785-ENET PLC-5 Ethernet Interface Module Installa Manual do Utilizador descarregar pdf (Página 15)

PLC-5 Ethernet Interface Module 15

Publication 1785-IN019B-EN-P - January 2007

Before You Begin

Follow these directions before installing your module:

1. Check your Ethernet interface module package.

2. Make certain that you have the following items:

If any items are missing or incorrect, contact your local distributor or Rockwell Automation

representative.

3. Locate and record the Ethernet hardware address.

Your module is assigned an Ethernet hardware address at the factory. Look for this

address in the back, lower corner of your module, or in the channel 3A configuration

dialog in RSLogix 5 programming software.

Quantity Description

1 1785-ENET Ethernet Interface Module

1 Connector kit containing 1 PLC-5 controller 58-pin connector header

1 Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1

1 PLC-5 Ethernet Interface Module Installation Instructions, publication 1785-IN019

Ethernet hardware

address label

Ethernet Hardware

Address Label

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

Sem comentários

Rockwell-automation 1785-ENET PLC-5 Ethernet Interface Module Installa Manual do Utilizador Página 15