Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Manual do Utilizador descarregar pdf (Página 20)

20 ControlNet Scanner Card

Publication

1784-5.35 – April 1999

4. Select

the I/O Base Address for this card.

Refer to Worksheet E on page 11. You

recorded your I/O base address there.

Important:

Make sure that the card is

not

connected to a ControlNet network.

Click Next to continue.

The wizard prepares to locate the card at the I/O address you defined. If you

have installed multiple cards, the check wizard can be run for each card by

entering a different I/O address each time.

Click Next to continue.

The wizard attempts to locate your 1784-KTCS card at the specified I/O

address.

When the wizard locates your card, it displays

Card has been found, and:

DualPort address where the card was found

Bootcode version

serial number

main code version

Click Next to continue.

The wizard attempts to put the KTCS card in the online state.

Important:

Make sure that the KTCS card is

not

connected to a

ControlNet network.

Click Next to continue.

ou see the message:

Going Online.

Click Next to continue.

ou see the message:

Online State Reached.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sem comentários

Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Manual do Utilizador Página 20