Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Manual do Utilizador descarregar pdf (Página 11)

ControlNet Scanner Card 11

Publication

1784-5.35 – April 1999

orksheet E

Your

base I/O space address

Record the base I/O space address for the KTCS card:

Card:

Slot number:

Using default address:

If no, new I/O space address:

yes no

up (1)

down (0)

1234

Setting the Card’s Switches

ATTENTION:

When setting the switches, be sure to avoid touching

other components on the card.

1. Follow the card handling instructions on page 4.

2. Remove the card from the anti-static clamshell.

Important: When selecting configuration settings, check for conflicts with

other interface cards and system memory. If there is a conflict,

the host computer will not operate properly.

You must find a way to disable caching and shadow memory for at least the 16K

of memory space occupied by each card. This can usually be accomplished

through your CMOS setup program and/or memory manager

, and must be done

before running applications with the KTCS cards.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Sem comentários

Rockwell-automation 1784-KTCS ControlNET Scanner Installation Instruct Manual do Utilizador Página 11