Rockwell-automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. Manual do Utilizador descarregar pdf (Página 20)

Communication Interface Module

Cat. No. 1784-KT2/C

Installation Data

Running the Diagnostic Program

When you have completed the start–up procedures, the following screen

appears:

You must now specify which 1784–KT2 module you want to test. To do

this, follow the steps below:

1. Press [F3]. The number of each slot containing a 1784–KT2 is

displayed.

2. Specify the slot number of the 1784–KT2 you want to test by moving

the cursor to the desired slot number and pressing [ENTER]. You can

press [F3] to select a new module whenever [F3] appears on the

screen.

The following sections describe each of the above diagnostic options.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sem comentários

Rockwell-automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. Manual do Utilizador Página 20