Rockwell-automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. Manual do Utilizador descarregar pdf (Página 12)

Communication Interface Module

Cat. No. 1784-KT2/C

Installation Data

Figure 1

Cable Pinouts for the 1784- CP2 Cable

Connecting the 1784-KT2 to a PLC-3

To connect the 1784–KT2 to a PLC–3, follow these steps:

WARNING: To avoid personal injury, always disconnect the

ac power before making the cable connection.

1. Plug the 62–pin connector end of the 1784–CP3 cable into the

1784–KT2 and secure with captive screws.

2. Connect the other end of the 1784–CP3 cable (labeled “Industrial

Terminal End”) into the PERIPHERAL CHANNEL 0 connector on

the PLC–3.

3. Reinstall the ac power cord and turn on the computer.

Figure 2 shows cable pinouts for the 1784–CP3 cable.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sem comentários

Rockwell-automation 1784-KT2/C INST.DATA COMM.INTERFACE MOD. Manual do Utilizador Página 12