Rockwell-automation 1760 Pico GFX-70 Controllers Quick Start Manual do Utilizador descarregar pdf (Página 49)

Publication 1760-QS002A-EN-P - April 2004

Lesson 5 7-7

Program for Device 2 (Pico-Link ID 2)

The Properties fields for the two bit outputs must be set as follows:

Enter the number of the operand in the SN list box, 1 for SN1 and 2 for SN2.

The preceding station number (Pico-Link ID) must be set to 1 for both SN

operands since the signals are to be sent to the Pico-Link station 1 (master).

To read the P buttons, we must enable them beforehand.

1. To do this we return to Project View and left-click Device 2. The

parameter dialog will appear in the Properties field.

2. Select the System tab and activate the P Buttons check box (see the

following figure).

Bit output SN 1 Bit output SN 2

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 57 58

Sem comentários

Rockwell-automation 1760 Pico GFX-70 Controllers Quick Start Manual do Utilizador Página 49