Rockwell-automation 1395 Multi-Comm Hardware/Software Manual do Utilizador descarregar pdf (Página 5)

Chapter

1–2

Before You Begin

Objective This manual contains the information necessary to perform the following

functions on the Multi-Communications Adapter (MCA) Board:

S Install and Set-up the MCA board

S Configure the Drive for control by a PLC Controller

S Maintain and Troubleshoot the board

Audience This manual is intended for use by expert personnel familiar with the

functions of solid state drive equipment. You must be thoroughly familiar

with the Bulletin 1395 and its hardware before attempting to setup or

troubleshoot a Multi-Communications Adapter Board.

To make efficient use of this Adapter Board you must be able to operate

and program an Allen-Bradley PLC controller. If you cannot, refer to the

appropriate programming and operations manual for your PLC controller

and obtain training from the support division before attempting to setup

and program the MCA board.

Vocabulary In this manual we refer to the Multi-Communications Adapter board as the

“MCA board” or the “Adapter”.

The Remote Input/Output interface is referred to as the “RIO”.

The Programmable Logic Controller is referred to as a “PLC



”.

The Allen-Bradley Data Highway + interface is referred to as “DH+”

MultiCommunications Adapter The MCA board provides a sophisticated interface to Allen-Bradley PLC

Compatibility & Features controllers and other equipment capable of communicating over serial

communications links. This adapter has the following features:

S Two separate communications channels, each capable of being

configured as either Allen-Bradley Remote I/O (RIO) or Allen-Bradley

Data Highway + (DH+) interfaces.

S Four programmable function blocks which can be used to manipulate

data.

S One programmable discrete input (24VDC or 115VAC).

S Compatible with Allen-Bradley PLC5/60, PLC5/40, PLC5/25, PLC5/15;

PLC250; PLC3 and Control View.

PLC



is a registered trademark of Allen-Bradley Company Inc.

1 2 3 4 5 6 7 8 9 10 ... 146 147

Sem comentários

Rockwell-automation 1395 Multi-Comm Hardware/Software Manual do Utilizador Página 5