Rockwell-automation SA500 Drive Configuration and Programming Manual do Utilizador descarregar pdf (Página 81)

Configuring the UDC Module’s Registers

3-49

Meter Port 3

Port 3 UDC Register Number 1010

Enter the UDC register number (0 - 2044) to be mapped to meter

port 3.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

Port 3 Bit Number Register 1011

Bit number of the UDC register specified in register 1002 that is to be

mapped to port 3. Enter a value of 100 (bit 00) to 115 (bit 15) as

required. Enter a value of zero if all of the register’s bits are to be

displayed.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

Port 3 Maximum Value Register 1012

Set this register to the number that will represent +10V. The

maximum allowable value is 32767.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

Port 3 Minimum Value Register 1013

Set this register equal to the number that will represent -10V. The

minimum allowable value is -32768.

Sug. Var. Name:

N/A

Units:

N/A

Range:

N/A

Access:

Read/Write

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 125 126

Comentários a estes Manuais

Sem comentários

Rockwell-automation SA500 Drive Configuration and Programming Manual do Utilizador Página 81

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Rockwell-automation SA500 Drive Configuration and Programming