Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 70 Dr Manual do Utilizador descarregar pdf (Página 32)

32 Rockwell Automation Publication IASIMP-QS031A-EN-P - February 2012

Chapter 2 Add a PowerFlex 70 Drive to an RSLogix 5000 Project

Test the PowerFlex 70 Drive Tags

1. Move the controller mode switch

to RUN.

2. Double-click Controller Tags.

3. On the Monitor Tags tab, expand

the PowerFlex 70 output tag and

change the ClearFault tag to 1 to

clear any initial faults.

4. Change the ClearFault tag

back to 0.

5. Expand the PowerFlex 70 input

tag and Verify that the

I.DriveStatus_Ready tag value is 1.

This tag indicates that the drive is

ready to start.

RUN

REM

PROG

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39 40

Sem comentários

Rockwell-automation Logix5000 Control Systems: Connect PowerFlex 70 Dr Manual do Utilizador Página 32