Rockwell-automation Liqui-Flo Control Configuration Software Version 6 Manual do Utilizador descarregar pdf (Página 61)

Monitoring Drive Status and Alarms

7-1

CHAPTER 7

Monitoring Drive Status and Alarms

This section describes how to monitor drive status indicators and alarms.

7.1 Displaying and Clearing the Fault Log and Alarm Log

You can display fault or alarm logs to help you troubleshoot problems.

To upload the fault log or alarm log from the drive, follow these steps:

Step 1. Make sure the personal computer is connected to the drive. Refer to chapters

2 and 3 for instructions about connecting the personal computer to a drive.

Step 2. From the Drive menu, choose Fault/alarm, or click .

The fault or alarm number, description, and time stamp is displayed in the list box. The

displayed log is updated about once a second with any new alarm or fault information.

Figure 7.1 shows a sample fault log while figure 7.2 shows a sample alarm log.

Figure 7.1 – Sample Fault Log List Box

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 99 100

Sem comentários

Rockwell-automation Liqui-Flo Control Configuration Software Version 6 Manual do Utilizador Página 61