Rockwell-automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM Manual do Utilizador Página 245

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 244
Publication AG-UM008C-EN-P - February 2005
Configuring Logix Controllers 7-19
Configuring the Controller
as a Slave Station
To configure the controller as a slave station, follow the steps below
using your programming software:
Use Table 7.6 to help you understand the communication parameters
you need to specify on the Controller Properties screen.
Use Worksheet 7.3 (page D-24) for an example configuration and to
record your station’s configuration.
1. To bring up the Controller Properties
interface, click on the controller icon
just beneath the keyswitch icon.
2. Choose the Serial Port Protocol tab
and configure according to your
specification. Serial Port Protocol
parameters and defaults can be
found in Table 7.6.
Vista de página 244
1 2 ... 240 241 242 243 244 245 246 247 248 249 250 ... 419 420

Comentários a estes Manuais

Sem comentários