Rockwell-automation 8520-OM Offline Development System User Manual Manual do Utilizador descarregar pdf (Página 77)

7-- 3Using ODS Communication Configuration

Publication 8520-- UM051A--EN--P -- October 2000

Offline DevelopmentManual (ODS) SoftwareUser Manual

Configuring t he required information for the various driver types as

shown i n Figure 7.2 is identical for all of the menus:

• <SHIFT-TAB> lets you review previous menus

• <TAB> previews the next menu

• <ALT-T > exits from the configuration menu saving the data

• <ESC> exits without saving

Figure 7.2

DriveTypeMenu

The 1784-KL module l ets a T45 and T47 communicate with the

PLC-5 processor. The 1784-KL also provides DH+ to DH+

programming.

To configure the information for the 1784-KL module, select (B)

from the Driver Type menu (Figure 7.2). Figure 7.3 describes the

menu flow to configure the KL module.

The 1784-KT module provides access for DH to DH+ programming.

It only takes one slot in your programming terminal and provides

communication t o all Allen-Bradley processors.

To configure the information for the 1784-KT module, select (B)

from the Driver Type menu. Figure 7.3 describes the menu flow

used to configure t he KT module.

The communication driver i s i nterrupt driven so that the serial port

must support hardware interrupts. On most machines, COM1 and

COM2 support these interrupts.

Menu Structure

Configuring a 1784-KL

Configuring a 1784-KT

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 99 100

Sem comentários

Rockwell-automation 8520-OM Offline Development System User Manual Manual do Utilizador Página 77