Rockwell-automation 8520 9/PC CNC Tool Path Graphics Programming Manua Manual do Utilizador descarregar pdf (Página 15)

9/PC CNC Tool Path Graphics Programming Manual 15

Publication 8520-PM097A-EN-P - September 2001

Figure 5

Coordinate System After Rotation

Selecting a Part Program

To use the Tool Path Graphics feature, you may want to have a part program running. If you

did not select a program to execute, select one now, following these steps:

1. Press the {PRGRAM CHECK} sof tkey.

2. Select a program. Press {SELECT PRGRAM}. Use the up and down cursors to

select a program.

Press {ACTIVE PRGRAM} to return to level 2 and activate the program.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sem comentários

Rockwell-automation 8520 9/PC CNC Tool Path Graphics Programming Manua Manual do Utilizador Página 15