Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual do Utilizador descarregar pdf (Página 15)

Product Overview 1-5

LED Status Indication

The LED Status Indication provides 4 status LEDs and a Reset

button. The LEDs provide status indication for the following:

•POWER LED

The LED is illuminated solid green when control power is present

and with the proper polarity

• RUN LED

This LED is illuminated solid green when a start command and

control power are present

•NETWORK LED

This bi-color (red/green) LED indicates the status of the

communication link

•FAULT LED

Indicates Controller Fault (Trip) condition

The “Reset Button” acts as a local trip reset.

Figure 1.3 Status Indication and Reset

Fault Diagnostics

Fault diagnostics capabilities built in the ArmorStart Distributed

Motor Controller help you pinpoint a problem for easy

troubleshooting and quick re-starting.

Fault Indication

Available on

Bulletin:

Fault Indication

Available on

Bulletin:

280/281 284 280/281 284

• Short Circuit X X • Phase Imbalance X

• Overload X X • Miscellaneous Fault X X

• Phase Loss X X • Brake Fuse Detection X

• Control Power Loss X X • Internal Comm. Fault X

• Control Power Fuse Detection X X • DC Bus Fault X

• Output Power Fuse Detection X X • Ground Fault X

• I/O Fault X X • Overcurrent X

• Over Temperature X X • Restart Retries X

• DeviceNet™ Power Loss X X • Stall X

• EEprom Fault X X • Phase Short X

• Hardware Fault X X

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 319 320

Sem comentários

Rockwell-automation 284D ArmorStart - Safety Version - User Manual Manual do Utilizador Página 15