Rockwell-automation 281E ArmorStart EtherNet/IP - Getting Started Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Equipamento Rockwell-automation 281E ArmorStart EtherNet/IP - Getting Started. Rockwell Automation 281E ArmorStart EtherNet/IP - Getting Started User Manual [en] Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 44
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
QUICK START
ARMORSTART
®
ETHERNET/IP DISTRIBUTED
MOTOR CONTROLLER
Getting Started
BULLETIN 280E, 281E AND 284E
Introduction
This guide provides the basic information required to start up an
ArmorStart
®
EtherNet/Industrial Protocol (IP) Distributed Motor
Controller. For detailed information on specific product features or
configurations, refer to the ArmorStart EtherNet/IP user manual,
Publication 280E-UM001*.
The user should have a clear understanding of EtherNet/IP™ network
operations, including how slave devices operate on a network and
communicate with other devices and the controller. Also, the user should
be familiar with and have access to RSLogix 5000™ revision 17.01 or later.
This programming software package is referred to often in this manual.
ATTENTION: This guide is intended for qualified service
personnel responsible for setting up and servicing these devices.
The user must have previous experience with and a basic
understanding of electrical terminology, configuration procedures,
required equipment, and safety precautions.
Vista de página 0
1 2 3 4 5 6 ... 43 44

Resumo do Conteúdo

Página 1 - MOTOR CONTROLLER

QUICK STARTARMORSTART® ETHERNET/IP DISTRIBUTED MOTOR CONTROLLERGetting StartedBULLETIN 280E, 281E AND 284EIntroductionThis guide provides the basic in

Página 2 - 284E Applications

10 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Factory installed ArmorConnec

Página 3 - Features

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 11Figure 12 – Control Power Wir

Página 4 - Conduit Gland Entrance

12 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011equipment or device as open w

Página 5

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 13ArmorStart Receptacle Pin Out

Página 6 - Connectivity

14 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Figure 17 – Receptacle Connec

Página 7 - ArmorConnect Gland

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 15Figure 21 – Receptacle Connec

Página 8 - Detail A

16 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Figure 23 – 284E Removal of C

Página 9 - Cat. No. 280-PWR35G-M1

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 17Configuring EtherNet/IP Addre

Página 10 - Control Power Wiring

18 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Figure 26 – Network Address E

Página 11 - 24V DC Control Power

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 19DHCP IP SupportDHCP (Dynamic

Página 12

2 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011General PrecautionsIn addition

Página 13 - ArmorStart Receptacle Pin

20 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Parameter ConfigurationArmorS

Página 14

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 21ArmorStart EtherNet/IP Add-On

Página 15 - Disconnecting MOVs

22 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 20112. Within the “Other” categor

Página 16 - Remove Jumper

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 234. Go online with the control

Página 17 - Configuring EtherNet/IP

24 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011DiagnosticsEtherNet/IP LED St

Página 18 - Automation BootP/DHCP

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 25Refer to Parameter 63 "B

Página 19 - Internal Web Server

26 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Control Module Fault LED Indi

Página 20 - Parameter Configuration

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 27Table 9 - Fault LED Indicator

Página 21 - Add-On Profile for Logix

28 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011TroubleshootingIntroductionTh

Página 22 - Figure 32 – New Module Box

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 29Bulletin 280E/281E Troublesho

Página 23 - Figure 34 – Controller Tags

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 3ArmorStart EtherNet/IP Feature

Página 24 - Indication

30 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Bulletin 284E Troubleshooting

Página 25 - Status and Reset

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 31Internal Drive FaultsA fault

Página 26 - LED Indications

32 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011The following table describes

Página 27

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 33➊ See Table 9 for internal dr

Página 28 - Introduction

34 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Resetting Device to Factory D

Página 29 - Faulted Display

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 35Control Module Removal1. Disc

Página 30 - Fault Definitions

36 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Figure 40 – Control Voltage a

Página 31 - Internal Drive Faults

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 37Bulletin 280E/281E/284E Progr

Página 32

38 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011ControlLogix Command and Stat

Página 33

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 39Default Input and Output (I/O

Página 34 - Factory Defaults

4 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011DimensionsDimensions are shown

Página 35 - Control Module Removal

40 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Table 19 - Instance 151Produc

Página 36

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 41Notes:

Página 37 - Basic Setup Parameters

42 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Notes:

Página 38

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 43Notes:

Página 39 - Table 18 - Instance 150

Publication 280E-QS001B-EN-P — February 2011 PN-94027Supercedes Publication 280E-QS001A-EN-P — November 2010 Copyright ©2011 Rockwell Automation, Inc.

Página 40

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 5Conduit Gland EntranceFigure 4

Página 41

6 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011ArmorConnect® Gland Connectivi

Página 42

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 7ArmorConnect Gland Connectivit

Página 43

8 ArmorStart EtherNet/IP Distributed Motor Controller Getting StartedPublication 280E-QS001B-EN-P – February 2011Control and Power ConnectionsF

Página 44 - Trademark List

Publication 280E-QS001B-EN-P – February 2011ArmorStart EtherNet/IP Distributed Motor Controller Getting Started 9Recommended Cord GripsFigure 8

Comentários a estes Manuais

Sem comentários