Rockwell-automation 2711C-xxxx PanelView Component HMI Terminals Quick Manual do Utilizador descarregar pdf (Página 24)

24 Publication 2711C-QS001F-EN-P - November 2010

Chapter 2 Make Terminal Connections

Connect Power to Terminal

1. Optionally, remove the

terminal block from the

terminal for ease of wiring.

2. Insert the DC+, DC-, and

the functional-earth ground

wires and tighten terminal

screws.

3. Re-attach terminal block to

terminal.

4. Plug the 3-prong power

connector into a 24V DC

power source.

For power requirements of

the PanelView Component

terminal, refer to the

installation instructions,

2711C-IN001.

The terminal goes through a

series of self-tests and then

displays the configuration

application for the terminal.

DC+

DC-

Functional

Earth Ground

to Ground Bus

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 109 110

Comentários a estes Manuais

Sem comentários