Rockwell-automation 2711C-xxxx PanelView Component HMI Terminals Insta Manual do Utilizador descarregar pdf (Página 11)

PanelView Component HMI Terminals 11

Publication 2711C-IN001H-EN-P - July 2014

1. Push the terminal firmly into the cutout on all sides and corners until the plastic bezel contacts the

enclosure and the gasket is fully compressed.

You will hear a series of clicks as the clamps self-adjust to the panel thickness.

IMPORTANT

The terminal temperature must be greater than 0 °C (32 °F) during panel installation.

IMPORTANT

Do not push on the display when pushing the terminal into the panel or you may damage

the display.

PanelView C600

PanelView C600

PanelView C600

44870

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comentários a estes Manuais

Sem comentários