Rockwell-automation 2707-MVH232_MVP232 MicroView Operator Interface Mo Manual do Utilizador descarregar pdf (Página 24)

Publication 2707-UM005AB-EN-P

3-8 Initial Setup and Mode Menu

After the new parameter is saved, the MicroView will again

display:

Note: Security codes can contain the wildcard character “?”. Any

entered value will be treated as a match to the wildcard. You must

make sure that the master security code is different from security

codes using wildcard entries. Otherwise the master security code may

be seen as a security code. For example, if the:

Security Code =12??????

Master Code =12368794

When the master security code above is entered, the MicroView

interprets it as a security code.

Enabling / Disabling

Scaling

Use scaling to convert data from a controller to engineering units such

as gallons or psi. When scaling is disabled, the values are not

converted. Refer to the MicroView Programming Software Manual for

a description of how values are scaled. The scaling factor is

determined by the application designer, it cannot be changed by the

operator.

1 Code

2 Scal

3 Sim

4 Test

5 Ex

Flow Rate

Transducer

Flow Rate

Transducer

Value = 510

MicroLogix Controller

MicroView displays

scaled value of 16

gallons Per Minute

Value from

Controller = 510

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 91 92

Sem comentários

Rockwell-automation 2707-MVH232_MVP232 MicroView Operator Interface Mo Manual do Utilizador Página 24