Rockwell-automation 25-COMM-E2P PowerFlex 25-COMM-E2P Dual-Port EtherN Manual do Utilizador descarregar pdf (Página 20)

20 Rockwell Automation Publication 520COM-UM003A-EN-E - June 2013

Chapter 2 Installing the Adapter

4. Insert the interface connector for the adapter into the header located at the

back of the control module.

5. Align the Communication card-Drive header on the adapter with the

interface connector. Then, press down firmly around the adapter. The

adapter snaps into the back of the control module.

6. Attach the control module to the power module.

Connecting the Adapter to

the Network

IMPORTANT

The CS1/CS2 terminals on the adapter provide a clean ground for the

communication bus cable shields. You should connect the CS1 or CS2

terminal to a clean ground or PE ground on the drive.

ATTENTION: Risk of injury or death exists. The PowerFlex drive may contain

high voltages that can cause injury or death. Remove power from the drive, and

then verify power has been discharged before connecting the adapter to the

network.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 171 172

Sem comentários

Rockwell-automation 25-COMM-E2P PowerFlex 25-COMM-E2P Dual-Port EtherN Manual do Utilizador Página 20